Faster installation
Members arrive drilled, coated and ready. Erection becomes an assembly operation rather than a fabrication one, so the programme is shorter and more predictable.

The connection method decides how fast a structure goes up, how well it can be inspected, and whether it can be modified in ten years. Here is why we bolt.
The four advantages
Members arrive drilled, coated and ready. Erection becomes an assembly operation rather than a fabrication one, so the programme is shorter and more predictable.
Welds are made in the shop against a documented procedure and inspected there. Site work is reduced to bolting to a specified torque, which is far easier to verify.
A bolted member can be unbolted. Openings can be added, sections replaced and the building extended without cutting into a welded frame.
Less site labour, less scaffolding time, less weather risk and less rework. The saving shows up in the installed cost, not just the material cost.
Side by side
| Criterion | Bolted connection | Site welding |
|---|---|---|
| Where the critical welds are made | In the fabrication shop, under controlled conditions | On site, in variable conditions |
| Inspection | Full shop QA, traceable to procedure | Site inspection, harder to access and verify |
| Erection speed | Fast — components arrive ready to assemble | Slower — welding, testing and rework on site |
| Weather dependency | Low | High — wind, rain and humidity affect weld quality |
| Skilled labour on site | Fitters and riggers | Certified welders plus inspection |
| Future modification | Members can be unbolted and replaced | Cutting and re-welding required |
| Dismantling / relocation | Practical | Rarely practical |
| Typical installed cost | Lower | Higher |
Comparison reflects general steel construction practice. Connection design for any specific structure is governed by the applicable AISC / BS / JIS provisions and the project loading.
FAQ
Bolted connections are made from shop-welded, quality-controlled components, so the critical welds happen in a controlled environment rather than on site. Erection is faster, inspection is simpler, future modification is possible, and total installed cost is usually lower.
Projects are executed in strict alignment with internationally recognised standards including ASTM, AISC, BS and JIS, with certified engineering practice and documented quality assurance.
Galvanizing deposits a zinc film on the finished surface that generally protects the product for 10 to 30 years without deterioration in structure or surface, depending on the exposure environment.
Both. Our Design + Supply + Installation model puts engineering, fabrication, delivery and erection under a single contract with one accountable party.
Yes, where it is planned for. We detail end frames and foundations so the building can be extended along its length without demolishing the existing gable.
Get in Touch
Send us the span, clear height, crane duty and intended use — we will come back with an indicative scope, tonnage and budget.
An engineer from the relevant division will contact you within one working day.