Explore Solar ROI Potential

Your monthly electricity bill, roof area and location give an indicative system size, saving, payback period and CO₂ reduction. Every assumption behind the result is listed so you can check it against your own figures.

Indicative result

Enter your monthly bill and roof area to see an indicative estimate.

— years Estimated payback
— kWpPossible system size
— kWhYear-1 generation
BDT —Monthly saving
BDT —Indicative investment
— t CO₂/yrCO₂ reduction
BDT —Annual saving
BDT —25-year saving
— t CO₂25-year CO₂ reduction
Indicative only — a site survey is required before any figure is committed.

    How the estimate works

    What the calculator is doing

    It sizes the plant against whichever constraint binds first — your roof, or your consumption — then models 25 years of savings against the investment.

    Roof constraint

    Usable roof area divided by the area a kilowatt-peak needs, after allowing for walkways and access.

    Load constraint

    Your bill converted to annual kWh, then to the system size whose output you could actually self-consume.

    Generation

    System size multiplied by the specific yield for Bangladesh, declining each year by an assumed degradation rate.

    Payback

    The year cumulative net savings — after O&M and with tariff escalation — cross the indicative investment.

    These are planning assumptions, not a proposal. Actual yield, cost and payback depend on your site, roof condition, tariff category, load profile and equipment selection. A site survey is required before any figure is committed.

    FAQ

    About solar economics

    As a planning figure we allow approximately 100 sq ft of unshaded roof per kWp of installed capacity. The exact figure depends on module efficiency, tilt, and the walkway and maintenance access the roof layout requires.

    Net metering lets you export surplus solar generation to the grid and offset it against what you import. Eligibility depends on your sanctioned load, connection category and the prevailing national guideline. RIEL reviews eligibility before design and handles the utility application end to end.

    Under CAPEX you fund and own the plant and take the full generation benefit. Under OPEX the plant is funded and operated by the developer and you pay only for the energy you consume at an agreed tariff. We model both over the asset life so the choice is made on numbers rather than preference.

    Photovoltaic systems are engineered for a 25-year-plus operating life. Output declines gradually — we design against an assumed annual degradation rate and confirm real performance through the AMC monitoring and reporting programme.

    Yes. Our AMC covers both RIEL-built plants and third-party installations, and begins with a condition and performance assessment of the existing asset.

    Get in Touch

    Turn the estimate into a proposal

    Send us the numbers you entered and we will survey the site and issue a costed technical proposal.

    • Reply within one working day
    • Free site survey before any commitment
    • Single-point EPC accountability, design to handover

    We reply within one working day. Your details are used only to respond to your enquiry.

    Thank you — your request is in.

    An engineer from the relevant division will contact you within one working day.

    WhatsAppFastest reply Call+880 1777 751 290 EmailSend a brief